Take you easy to drive a miniature fire truck

In recent years, the application of miniature fire engines has become more and more extensive. In the process of selecting related products, we can not only consider the price as the standard, but also consider the purchase or not. The prices of fire trucks in different regions are different. It is affected by local market factors. From the purchase channel analysis, it is more reliable to buy directly from the manufacturer. We can understand the situation of the manufacturer by visiting, from production and sales qualifications to production environment, etc., there will be a full understanding. In addition, if you buy directly from the factory, you do not have to go through other intermediate links, the price of micro-fire trucks will have many benefits.

When we bought a brand new miniature fire truck, we had to learn to drive properly, especially when faced with special road conditions, such as through a bumpy muddy road:

1. Be careful when passing the convex and concave road. The driver of the miniature fire truck should maintain the correct driving posture. The upper body and the backrest should be stable. Hold the steering wheel with both hands to prevent the body from losing control of the car with the car jumping.

2. When there is a continuous small bump road or “squat board” road, it is necessary to decelerate properly, keep driving at a constant speed, and always pay attention to changes in road conditions.

3. When passing through muddy roads, you should choose a place with a small degree of muddy, a relatively flat road or along the front track. Generally use medium or low speed gears, should maintain sufficient power to pass smoothly, try to avoid shifting and parking on the way.

4. When passing through the muddy road, the operation of the steering wheel should be stable. It is forbidden to make a sharp turn, use the brakes as little as possible or not, and prohibit the use of emergency braking to prevent side slip accidents.

5. When passing through the concave cross-section, the driver of the miniature fire-fighting vehicle should lift the accelerator pedal and lower the speed to a certain extent. Use the inertial force of the locomotive to make the front wheel slip down the bottom of the concave groove, and then add the oil to the ditch. Then, when the rear wheel is turned to the concave groove, lift the accelerator pedal again, so that the rear wheel slides down the bottom of the ditch, and then refueling to make the rear wheel ditch.

6. When passing the convex obstacle surface, apply the low speed slowly, if necessary, stop in front of the obstacle and start again. When the front wheel is going to be obstructed, it should be refueled. When the front wheel reaches the obstacle, the accelerator pedal can be raised to make the front wheel slowly slide down the obstacle, and then the front wheel passes the method to make the rear wheel pass.

In addition to the safety of driving, the correct operating habits can save a lot of unnecessary expenses for the vehicle, such as fuel saving.

1. Before the operation, the micro-fire truck should be inspected and repaired to prevent sickness. The fire-fighting tools must be correct and reasonable to avoid slipping and fuel consumption.

2. When the miniature fire truck is walking, try not to use or use less brakes to reduce power consumption. To properly select the traction load, do not overload, and do not have a small horse-drawn carriage.

3. Maintain a high tire pressure. The general inflation pressure is 98-147 kPa/cm 2 higher than the specified value, but it must not exceed the air pressure.

4. The engine water temperature should be kept between 85-95C. Because of the high efficiency between this water temperature, the minimum fuel consumption.

5. The locomotive should work as full as possible. If the load is insufficient, the operation method of high-grade small throttle should be adopted.