Jinan Military District Officer and First Class Hero Xie Guozhi Save 6 People

2024-08-25 03:02:30
Jinan Military District Military Officer, First Class Xie Guojiang Zhi saves six people under the water diesel generator | Diesel Generator Price / 2012-05-22

Jinan, May 22nd, was the first class hero in the past, and he is now making new contributions. In the past few days, the feat of Xie Guojiang, the head of a comprehensive training base of the Jinan Military Area Command, who rescued six people who had fallen into the water, was known as a story in Jinan, Quancheng.
On the afternoon of May 5th, Xie Guojiang took a rest on weekends and took his family to visit Zaolin Reservoir in Xiying Town, Jinan. Around 15:50, when they were ready to pack up and go home, they suddenly heard a rush of help. On a surface about 60 meters away from them, a cruise ship rolled over due to mishandling. At that time there were 6 people on board, including a man, three women and two children.
Too late to think, Xie Guojiang jumped into the water, struggling to push an abandoned cruise ship on the shore to swim to the sink, and arrive in the waters of the incident in less than two minutes. At this point, all six tourists have fallen into the water.
Because of the great wind in the afternoon, people were floating. Xie Guojiang considered that the boat should first stop beside the women with babies. He promptly lifted the baby, which was only about one year old, near him, and sent it to Xia Bojun, who was on the rescue boat. Afterwards, Xie Guojiang successively rescued three women. When he turned to look for the fifth drowning man, he found that the man had fallen into the water. At a critical moment, Xie Guojiang slammed into the water with a swift attack on the little girl who was sinking, and tried her best to pull her out of the water. At this time, Xie Guojiang’s physical strength was almost exhausted. When he again went back to the next man, the man clung tightly to Xie Guojiang’s instinct. Seeing that the two men are going to sink immediately, Xie Guojiang calmly and recumbently clamped the man's chest and tried his best to push him to the side of the boat, hold the cabin, and join the masses to push the boat to the shore.
Witnessing the masses said that the reservoir was too deep, ten meters deep, and it was dangerous to fall. The PLA lost the day to help, or it could be disastrous.
Six tourists were saved. Xie Guojiang, however, was suffering from severe diarrhea due to the influx of large amounts of sewage, and a long soaking time in low-temperature water. He is currently undergoing treatment in hospitals. After the news spread, people from all walks of life in Jinan City reacted strongly and rushed to the hospital.
The commander of the Jinan Military Area Command, Fan Changlong, visited the General Hospital of the Jinan Military Region to visit Xie Guojiang, who is undergoing treatment, and presented him with condolence payments. He also repeatedly took care of the medical staff to save the hero to recover without leaving any regrets.
Xie Guojiang’s feat of saving the people who fell into the water is also hotly debated on the Internet. The netizen said in the thread that Xie Guojiang was able to step forward at a crucial moment and successfully rescued six people under the assistance of the surrounding people. This not only reflected the decisive, brave, and fearless sacrifice of fighting style of the soldiers, but also demonstrated scientific salvation. , flexibility and flexibility of the opportunity to adapt.
In an interview, the reporter learned that there is a series of touching stories behind Xie Guojiang’s rescue of feats. As early as 1994, Xie Guojiang began to use its own subsidy to support poverty-stricken children in Yimeng Mountain to go to school, and led the organization to establish 42 "love contact groups." For more than a decade, under his efforts, the "Love Contact Group" has rescued more than 1,200 impoverished students. In February 2000, the United Nations Development Program and the China Youth Development Foundation jointly awarded Xie Guojiang the “Foreign Youth Poverty Eradication Award”. In May of the same year, the Jinan Military Region wrote Xie Guojiang’s first class performance.
Xie Guojiang said: “I just did something that I should do. The community has given me a lot of love and care. After I leave the hospital, if I have people in trouble, I will not hesitate to come forward.” (Finish)
Next:Installation, use and regulation of marine diesel generator sets
Previous post: Man Guangxi Beihai was shot by several high school students and his right eye was detonated

Weld Materials

1.Welding materials

In Welding, substances called filler materials or consumables are used. As the name implies, these substances provide filler or a body of molten materials that provides a strong bond to be formed between the base metals used. Most welding processes will also require some form of shielding to protect both the main components and filler from being oxidized during the process.


The type of welding materials used during welding depends on the nature of the job intended. Electrodes draw the necessary energy in order to perform welding applications. Luoyang Golden Egret Company has any kind of welding materials include CTC Welding Rod /rope, SCTC welding rod/rope, TC electronic welding rod, Ni-based welding rod, flux-cored Welding Wires, solid welding wires and etc.

Welding can be applied in different kinds of industries such as building and construction, oil and gas, marine, power generation, steel, mine tools, automobile, transportation and etc.


2. Welding rod

1)Cast tungsten carbide based tubular rod

The hard phase of the rod is cast tungsten carbide which leads to higher hardness and better wear-resistance.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65

Mainly used for Mining machinery, Geological tools, Petroleum drilling tools etc, by Oxy-Acetylene with weak carburizing flame.

Ni Based Welding Rod


Product recommendation:

GT1103 (CTC, 60-80 mesh),

GT1103-1(CTC, 20-30 um),

GT1103-2(CTC, 40-60 um)

2)The hard phase of tube rod is carbide pellets which leads to higher impact resistance and better wear resistance than CTC cloase rod.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65 wear test.

Mainly used for mining machinery. Geological tools etc; by Oxy-acetylene with weak carburizing flame.

Product recommendation:

GT2102 (Cemented carbide grit, 30-60mesh)

GT2102-2(Cemented carbide grit, 30-40mesh)

GT2102-3(Cemented carbide grit, 40-60mesh)

3)Tube rod is composited by Cemented carbide pellets, Spherical CTC and CTC. The layer has higher impact resistance, better wear resistance and good fluidity than other rods.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65.

Mainly used for oil method drill bits, such as Tri-cone bit, Steel tooth bit, PDC bit, etc. By Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT3302 (carbide pellets, 20-40mesh)

GT3302-1(carbide pellets, 14-40um)

4)The hard phase of the rod is monocrystal WC, the welding layer has a higher wear resistance and better impact resistance.

The wear resistance is 6-7 times better than others, tested by ASTM G65 method.

Mainly used for the repair and strength for oil drills bits, such as PDC bit diameter holding by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT4104 (Monocrystal WC, 80-200mesh)

3. Welding Rope

Made form mixture of CTC and self-fluxing nickel alloy covering on nickel wire. The CTC is in spherical or irregular with good wear resistance; the nickel alloy is in spherical or nearly spherical shape with good wettability and erosion resistance and better corrosion resistance than tubular rod.

Recommend to use Petroleum drilling tools, Concrete mixing blade, Mud pump, Coal sluice, Coal drill pipe, Tunnel drilling machinery etc.

By Oxy-Acetylene Welding with weak carburizing flame.

5mm Welding Rope

Product recommendation:

GS110450N (CTC, 4mm, HRC 47-55)

GS110550N (CTC, 5mm, HRC 47-55)

GS110650N (CTC, 6mm, HRC 47-55)

4. Welding Bar

The rod is sintered by CTC and Ni-based powders. The CTC(Cast Tungsten Carbide) is in irregular or spherical shape with better wear resistance and the nickel alloy is in spherical or nearly spherical shape and has good wettability with cast tungsten carbide. The cladding layer has a higher impact resistance and better wear resistance.

Its wear resistance and corrosion resistance is between tube rod and flexible rope.

Mainly used on the Steel PDC bit, Concrete mixer blade, Mud pump, Miner chute, Miner drill stem and Mechanical parts of Tunnel rock drill machine etc.

Welded by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GD4025253-3(CTC, SCTC, 4*600/6*600)

GD4030303-3(CTC, SCTC, 4*600/6*600)

5. Welding wire

Intensified molybdenum titanium vanadium composite chromium carbide welding wire can improve layer`s bonding strength and tenacity. This wire can use for multilayer welding which has no peel off, and it can maintain good wear resistance under certain impact working condition.

Product recommendation:GSQD671Mo-4(1.6mm)

Medium carbon and high chromium wear resistance welding wire has a higher hardness, stronger wear resistance, and excellent toughness by adding a certain amount of molybdenum alloys and boride. It has a better impact resistance and strip resistance than high chromium cast iron type materials

Product recommendation: GSQD621Mo-4(1.6mm)

6. Tungsten Carbide Pellets

With high sphericity & excellent alloy organization, cemented carbide pellet is mainly used in welding, as an adding material of PTA Powder , tubular welding rod, to improve the wear resistance of the workpieces greatly.

Product recommendation: GQ06


Wc 6co Tungsten Carbide Pellets


7. Tungsten Carbide Grits

Cemented carbide grit with different percent of cobalt has good abrasive resistance and is widely used for making grinding, polishing and cutting tools.

Product recommendation: GS08A


Wc 8co Tunsgten Carbide Grits




Weld Materials,Tubular Welding Rod,Welding Electrodes,Stainless Steel Welding Rod

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcalloypowder.com