Know the fire escape car
With the increasing concentration of urban buildings, fire-fighting facilities are increasingly valued and well-known by people. The concept of firefighting is very wide. From fire fighting to flood relief, oil tank explosions, and even children being trapped, fire protection can be seen in these scenarios. The figure of officers and men today came to recognize the very important fire-fighting ascents in fire fighting equipment.
The fire-fighting ascending car is a disaster-relief vehicle used by firefighters to rescue people trapped in high places by the fire, transfer the property of the affected people and ensure the safety of the affected people. The fire escape vehicle is equipped with a lift device, otherwise the fire escape vehicle loses the necessary conditions for high altitude rescue. The accuracy of the fire-fighting ascends the level, which directly affects whether fire officers and soldiers can successfully rescue the affected people. Helping to find a breakthrough point for disaster relief can save prime time for disaster relief. The fire elevation must be properly maintained and maintained at a certain level on the affected high floor.
The fire exalt truck is an indispensable part of the urban fire protection system. The quality of the fire exaltation truck cannot be ignored. The normal length of the fire excavation vehicle on the market is 12 meters and the width is about 3 meters. The height due to type and disaster site is not fixed. The most common is 50 meters. A fire truck can carry a maximum of about 100 kilograms. This number is critical, and the efficiency of carrying and disaster relief is directly proportional.
Although the fire-climbing vehicles can quickly eliminate fire during the fire and save the affected people, the narrow alleys cannot satisfy the existence of the fire-climbing vehicles. Therefore, the use of fire-extinguishers is also required. There must be a fire exit or a broad one. It is easy to work on the road. If there is no condition for fire engines to enter, no matter how good the fire-climbing car can not solve the problem for the first time, on the issue of the scene of the fire-climbing car, many communities are now in the early design stage to prepare a green channel for the fire-climbing vehicle to prevent dangerous situations. occur.
Fire-fighting ascending vehicles are indispensable fire-fighting equipment. High-quality fire-fighting ascending vehicles can not only reduce the damage caused by disasters, but also quicken the rescue of people affected by the disaster. Moreover, good fire-fighting ascension trucks are also an extra layer of safety for soldiers who perform tasks for us. Safeguard!
GYQ drilling rig is an upgraded and improved product of GXYdrilling rig. It mainly adds the winch detachment
function structure, thereby extending the service life of the hoist. This drilling rig is a vertical transmission rotary drilling
rig with mechanical transmission and hydraulic feed. It can be applied to engineering geological survey, general survey of
solid deposits, grouting of dams and ventilation and drainage of tunnels. Depending on the drilling formation, cemented
carbide, steel grit, and auger types can be used for drilling.
Main Feature:
The structure of this rig has the following features:
1. A more reasonable speed range is selected. There are eight speed levels, centralized speed change, self-locking with
each other, large low-speed torque, and a wide range of use.
2. The drilling rig has two speeds of reversing speed, which is convenient for handling faults safely.
3. The self-centering hydraulic chuck is adopted, which is convenient for clamping and loosening the drill pipe. And has
a hydraulic feed mechanism, strong pressure and lifting capacity.
4. Equipped with sufficient instruments, it is helpful to grasp the situation in the hole, fewer operating handles, more
reasonable layout, flexible and reliable operation.
5. The two-plate normally closed friction clutch is adopted, which is flexible to open and close, and easy to adjust and use.
6. The rig is light in weight, compact in structure, easy to disassemble, and suitable for drilling work in hills or mountains.
7. The hoist has a detachment function. Increased the service life of the hoist.
Gyq Drilling Rig,Gyq Survey Machine,Gyq Survey Rig,Spindle Core Drilling Rigs
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.sjxitecdrilling.com