1 Cavity Thin Wall Mould of Plastic Thin Wall Bowl
Jtp Mould is known as one of the best manufacturers and exporters for plastic injection moulds for household articles, chair mould, pallet mould, crate mould, automotive mould and so on. Our moulds are mainly exported to Italy, Australia, Saudi, Arabia, Jordan, Argentina, Colombia, India, Malaysia, Philippines and other 20 countries.
1. More detailed about 1 cavity thin wall mould of plastic thin wall bowl
Name                   1 cavity thin wall mould of plastic thin wall bowl
Mould material           718 2738 S136 etc
Cavity                   1 cavity
Runner                 hot runner
Mould design           3D/2D
Design days             1 day
Mould life               1 million shots
Plastic material           PP PS AS etc.
Injection system          pin point gate
Payment                  40% of deposit by L/C T/T 60% of balance by L/C T/T
Delivery time              50-60 days
Specification              Depends on customers' demand
2. Why thin wall containers are so difficult to molding?
Generally, during injection molding, thin wall container easy to appear uneven wall thickness and as the wall thickness is too thin, it needs high speed and high pressure injection, so the machine should be bigger than machine for general product, it is not because of its mould size is bigger or it needs big injection weight, it just because it needs high injection pressure, so the clamping force should be big.
3. Why we can product good plastic thin wall moulds?
As for thin wall product moulds, the dimension of the moulds should be controlled precision. For such products, we always use high speed milling machine and some other high precision tooling machine to make it, the tolerance should be controlled in 0.02mm. Regarding the ejection system, we usually use air to blow first, then the container will not stick to the core and then use double ejector plates drived by hydraulic cylinders to ejector the product off the mould. As the container is too thin, so we generally don't use ejector pins, because ejector pin will easy lead to deformation.
Cooling system is also very important to such thin wall product, just as I stated above, for such product molding, it needs high speed and high pressure. So the mould temperature will be high, it is very important to control the mould in low temperature, so we should add water channel as more as possible, and it should be near the product surface. Besides, we always adapt with BeCu to help the mould cooling, because BeCu has good thermal conductivity. Even though, the price will be much high than mould without BeCu, but the good cooling will help make the product very beautiful.
Ecovacs Deebot Robot Vacuum Cleaners
The most worthy of nomination for the Chinese-made robot vacuum is the Ecovacs sweeping robot. The quality control of this sweeper is very good, even comparable to many imported models. Ecovacs Robot Vacuum Cleaner adopts a special five-fold cleaning plan design, one sweep, two rolls, three suctions, four strong wipes, five aromatherapy, floating ash, hair, stubborn dust, dirt, etc. are cleaned together. At the same time, its fragrance function It can also remove odors, which is a rigid need for pet families. In addition, its internal dToF flight ranging navigation is not limited by the scene and light, so you can easily grasp the structure of the house, navigate accurately, and clean it smoothly.
Ecovacs Deebot Robot Vacuum Cleaners,Robot Vacuum,Vacuum Robot,Vacuum Cleaning Robot
Guangxi Nanning King Green Smart Co., Ltd. , https://www.kinggreensmart.com