Spiral Sand Water Separator
Spiral sand water separator installation Angle between 20 ° to 30 °, sand and water mixture from the feed line into the water tank, the mixture proportion of larger particles (such as sand) due to gravity drop deposited on the bottom of the spiral groove, under the impetus of the screw, the material at the bottom of the u-shaped groove along the diagonal to ascend, after leaving the liquid level, continue to move a distance, sand water gradually in the spiral groove of the clearance flow back into the water tank, sand also gradually drying at discharging port, relying on gravity fall into other conveyer. The supernatant continues to flow out of the drain. To achieve the purpose of sand - water separation.
1. Spiral-type sand water separator is composed of non-axial screw, liner strip, u-shaped slot, water tank, guide plate, outlet weir and drive device.
2, sand and water mixture from separator at the top of the input water tank, mixture relation between the larger, such as sand will deposit on the groove bottom, the screw, driven by the sand along the inclined groove bottom rises, continue to after leaving the liquid level goes on a distance, the sand discharge to fully dehydration after the row of sand sand bucket, sand and water after separation of water from the overflow mouth out and taken to a factory into the pool.
Â
1. The separation efficiency can reach 96% to 98%, and the particles with a particle size of 0.2mm or greater can be separated;
2. Adopt non-axial screw, non-water bearing, easy maintenance; 3. Compact structure and light weight;
4. The new transmission device, whose key production component -- reducer is an advanced shaft mounting type, which is convenient to install without coupling;
5. The liner is quick-loaded and easy to replace.
6. The axial position of the screw is adjustable to facilitate the adjustment of the safe clearance between its tail and box wall;
Spiral sand water separator installation Angle between 20 ° to 30 °, sand and water mixture from the feed line into the water tank, the mixture proportion of larger particles (such as sand) due to gravity drop deposited on the bottom of the spiral groove, under the impetus of the screw, the material at the bottom of the u-shaped groove along the diagonal to ascend, after leaving the liquid level, continue to move a distance, sand water gradually in the spiral groove of the clearance flow back into the water tank, sand also gradually drying at discharging port, relying on gravity fall into other conveyer. The supernatant continues to flow out of the drain. To achieve the purpose of sand - water separation.
1. Spiral-type sand water separator is composed of non-axial screw, liner strip, u-shaped slot, water tank, guide plate, outlet weir and drive device.
2, sand and water mixture from separator at the top of the input water tank, mixture relation between the larger, such as sand will deposit on the groove bottom, the screw, driven by the sand along the inclined groove bottom rises, continue to after leaving the liquid level goes on a distance, the sand discharge to fully dehydration after the row of sand sand bucket, sand and water after separation of water from the overflow mouth out and taken to a factory into the pool.
Â
1. The separation efficiency can reach 96% to 98%, and the particles with a particle size of 0.2mm or greater can be separated;
2. Adopt non-axial screw, non-water bearing, easy maintenance; 3. Compact structure and light weight;
4. The new transmission device, whose key production component -- reducer is an advanced shaft mounting type, which is convenient to install without coupling;
5. The liner is quick-loaded and easy to replace.
6. The axial position of the screw is adjustable to facilitate the adjustment of the safe clearance between its tail and box wall;
A blended powder of tungsten carbide and Metal Alloy Powder can be used for laser cladding, a process used to deposit a layer of material onto a substrate using a laser beam. This blended powder is typically used as a feedstock material for laser cladding applications where high wear resistance and hardness are required.
Tungsten carbide is a hard and wear-resistant material that is commonly used in cutting tools, mining equipment, and other high-wear applications. It has excellent thermal conductivity and high melting point, making it suitable for laser cladding processes.
Metal alloy powders, on the other hand, are often added to the Tungsten Carbide Powder to enhance certain properties or tailor the characteristics of the final cladding layer. These metal alloys can include nickel, cobalt, chromium, or other elements, depending on the specific requirements of the application.
The blended powder is typically prepared by mixing the tungsten carbide and metal alloy powders in the desired ratio. This mixture is then fed into a laser cladding system, where it is melted using a high-power laser beam. The molten powder is rapidly solidified onto the substrate, forming a dense and wear-resistant cladding layer.
The resulting cladding layer can have excellent hardness, wear resistance, and thermal conductivity, making it suitable for various applications such as tooling, wear parts, and surface protection. The specific properties of the cladding layer can be adjusted by varying the composition and ratio of the tungsten carbide and metal alloy powders in the blend.
Overall, the blended powder of tungsten carbide and metal alloy powder offers a versatile and customizable solution for laser cladding applications, providing enhanced wear resistance, hardness, and other desired properties to the final cladding layer.
WC Blend,Blended Powder,High Hardness Powder,Blended Coating Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcwelding.com