April 7 Taiyuan Steel Market Price Quotes

Product Name Specification Material Steel / Origin Price (Yuan/Ton) Than yesterday Last week than last month General line Φ6.5mm Q235 Changzhi Steel 5080 30 100 160 Common Line Φ8mm Q235 Changzhi Steel 5080 30 100 160 High Line Φ6.5mm Q235 Sea Xin 5080 30 100 130 High Line Φ6.5mm Q235 Zhongyang 5070 30 120 140 High Line Φ6.5/8mm Q235 Zhongyu 5070 30 120 140 High Line Φ8mm Q235 Haixin 5080 20 100 130 High Line Φ6.5mm Q235 Jincheng Fusheng 5070 20 110 240 Rebar Φ12mm HRB335 Changzhi Steel 5130 50 130 150 Rebar Φ12mm HRB335 Haixin 5080 30 120 180 Rebar Φ12mm HRB335 Jincheng Fusheng 4800 20 50 20 Rebar Φ18-25mm HRB335 Changzhi Steel 5050 70 170 170 Rebar Φ16-25mm HRB335 Haixin 5020 40 140 170 Rebar Φ16-25mm HRB335 Wine steel 5020 40 150 170 Rebar Φ16-25mm HRB335 Zhongyang 4850 20 100 120 Rebar Φ16-25mm HRB335 Jincheng Fusheng 4900 20 50 200 Rebar Φ12mm HRB400 Jiuquan 5300 20 150 150 Rebar Φ16-25mm HRB400 Jiuquan Steel 5100 20 150 150 Round Steel Φ12mm Q235 Changzhi Steel 6000 20 150 200 Round Steel Φ16-25mm Q235 Changzhi Steel 5700 20 150 200 Hot Rolled Plate 2.0mm*1250*C Q235 Too 5780 0 110 130 Hot rolled coil 2.5mm*1250*C Q235 Taigang 5500 0 0 50 Hot rolled coil 2.75mm*1250*C Q235 Taigang 5450 0 0 50 Hot rolled coil 3.0mm*1250*C Q235 Too Steel 5420 0 20 40 Hot rolled coil 4.0mm*1500*C Q235 Taigang 5480 0 100 130 Hot rolled coil 4.75mm*1250*C Q235 Taigang 5480 0 100 130 Hot rolled coil 7.5mm*1500*C Q235 Baotou Steel 5500 0 100 150 Cold-rolled coil 0.5mm*1000*2000 Q195 Card steel 6600 0 0 0 Cold rolled coil 1.0mm*1000*2000 Q195 Angang 6550 0 0 0 Cold rolled coil 2.0mm*1000*2000 Q195 Angang 6450 0 0 0 Cold rolled coils 3.0mm*1000*2000 Q195 Angang 6450 0 0 0 Cold rolled coils 1.0mm*1000*2000 Q195 Angang 6550 0 0 0 Puzhong 6mm Q235 Skysteel/Jiusteel 6720 20 70 120 Puzhong plate 8mm Q235 TISCO 6650 20 100 170 Puzhong plate 8mm Q235 Lin steel 6650 20 100 170 Puzhong plate 10mm Q235 Lin steel 6480 20 180 180 Puzhong plate 20mm Q235 Lin steel 6080 30 170 180 Puzhong plate 20mm Q235 Wenfeng 6050 20 160 170 Puzhong plate 20mm Q235 Dedicated 6050 20 160 170 Low alloy plate 8mm Q345 Taigang 6820 20 40 170 Low alloy plate 10mm Q345 Taigang 6720 20 170 220 Low alloy plate 20mm Q345 Taigang 6270 20 140 190 Angle steel 50*4.5/6 m Q235 Zhaobo 4500 0 0 0 Angle Steel 10*8/9m Q235 Tang Steel 4350 0 0 0 Angle Steel 14*140/9m Q235 Tang Steel 4400 0 0 0 Channel 8#a/8m Q235 Jiang Tian 4430 0 0 0 Channel 16 #b/8m Q235 Jinan Steel 45000 0 Channel 40#a/8m Q235 Steel 4850 0 0 0 I-beam 12#/12m Q235 Tangsteel 4750 0 0 0 I-beam 25#/12m Q235 Laiwu Steel 4650 0 0 0 I-beam 32#/12m Q235 packet-steel 4750 0 0 0

Desiccant Air Dryers

Externally Heated Desiccant Compressed Air Dryers

For decades, compressed air users have relied on YUKA HL-WR series heated desiccant air dryer to deliver technology that reduces the cost of operation and improves the reliability of air driven processes.

The HL-WR Series is engineered to deliver ISO 8573.1. Air Quality and reduce purge air consumption.

The micro heated regeneration adsorption dryer is a kind of humidification purification device that uses micro heat regeneration method to adsorb and dry compressed air according to the principle of pressure swing adsorption.

Feature & benefit

1. Micro-thermal regeneration adsorption dryer (hereinafter referred to as micro-thermal suction dryer), which has the advantages of both heating regeneration and non-thermal regeneration. The regeneration gas is micro-heated to reduce the regeneration air consumption and the regeneration is more thorough, Extend the tower switching cycle.

Under normal operating conditions, the dew point (under pressure) of the air can be reduced to below -40℃, and the lowest can reach -70℃. It can provide oil-free and water-free high-quality compressed air for a few applications that have high requirements for air quality.

It is especially suitable for use in cold areas in the north and other places where the ambient temperature is below 0°C.

2. The micro heat absorption dryer adopts a double tower structure, one tower absorbs moisture in the air under a certain pressure, and the other tower uses a small portion of dry air slightly higher than atmospheric pressure to regenerate the desiccant in the adsorption tower after a certain period of time , The two towers are switched to ensure continuous supply of dry compressed air.

3. On the basis of having all the advantages of the non-heat regenerative adsorption dryer, it adopts high-quality stainless steel finned U-shaped heating tube, which has uniform heating and high heat transfer coefficient, which can ensure long-term trouble-free operation.

4. Unique computer control system, visually display the running status of the dryer, and has multiple alarms, protection functions and DCS remote control interface to ensure trouble-free use.

5. The actuator adopts pneumatic angle seat valve and pneumatic butterfly valve. The pneumatic control system adopts deep dry air source and then filtered to ensure reliable action and avoid valve leakage.

6. The height and diameter of the adsorption tower are accurately calculated and experimental results, and the important parameters such as flow velocity and heat and mass transfer are indeed mastered, so as to avoid excessive wear of the adsorbent and tunnel effect.

7. Professional program control design, small air pulse and air pressure fluctuation, effectively reduce the outlet air dust and the regeneration air noise.

8. Convenient and practical cycle time mode and energy-saving economic mode. Regenerative air volume and time program can be adjusted to adapt to various actual use conditions and outlet dew point requirements. The support base has a stable and beautiful appearance, and is easy to install, use and maintain.

desiccant for air dryer,desiccant air dryer for compressor,desiccant compressed air dryer,regenerative desiccant air dryer,desiccant air line dryer

Hongrijia Depurate Facility Science & Technology Co.,Ltd. , https://www.yukafilter.com