Advantages of 1000W fiber laser cutting machine

Stable performance with high cutting speed, precision , efficiency and protection
1.High speed: Capable to cut sorts of metal board with air blowed; the cutting speed can reach dozens of meters per min.
2.High precision: Adopt high precision drive structure with imported service motor, ±0.03mm positioning precision
3.High efficiency: Software with strong function, capable to design sorts of shapes, letters for cutting with easy and convenient operation.
4.High protection: the laser source and machine tool is comprehensively sealed to ensure the security of the operator, the whole working process can be viewed and inspected through the glass.

Parameters of 1000W fiber laser cutting machine
   


Features of Han's GS Laser Cutter

1.Low running and maintenance cost 
1.1Lower running cost compared with traditional CO2 laser cutting machine, the power consumption is 20%-30% of CO2 laser cutting machine.
1.2Environmental protection, low power consumption which is just 20%-30% compared with traditional CO2 laser cutting machine.
1.3The maintenance cost of fiber laser cutting machine is much lower since it's without reflective lenses.
 
2.Rational Structure and Easy Operation
2.1 Professional CNC laser control system with computer control which is more simple and convenient for operation.
2.2 Satisfied with flexible processing with small size and intense structure design.
2.3 Convenient operation with fiber transmission, laser route adjustment is unnecessary.
2.4 Gantry design with double drive structure, high damping machine tool with better rigidity which can stand higher speed and acceleration speed.
2.5 Adopt with alternative drive system and transmission system which are imported from abroad to ensure the high speed, high precision and high reliability.
2.6 The rack and guide is comprehensively sealed to prevent the friction without oil and dust pollution in order to make the drive system much longer service time and ensure the movement precision of the machine tool.
 

 Machine table Features

1.    Gantry dual drive, adopting advanced gear rack transmission structure. Equipped with grinding gear and rack, and through the precision collimator one time metering assembly. The machine will secure long-term high cutting speed, high precision transmission.

2.    The machine table machined by large planomiller, with high temperature annealing twice, and high strength complete welding, customer will have long-term payback.


 

Professional CNC controller introduction

1.     Support different images format as Al, DXF, PLT, Gerber, can read standard ISO G codes from MaterCam, Type3 such nesting software.

2.     Automatically optimization when open or lead in DXF file, like delete repeated line, merge connected lines, recognize in/out cutting file and file sorting out.User can decide to manually do above work, or let controller do it automatically.

3.     Support conventional picture edit functions

4.     Following what you see is what you get, to set lead in/out, kerf compensation, merge, bridge, over burning, save gap ….etc

5.     Unique function of Preview of cutting work flow.

6.     Support segmental pierce, Progressive pierce, Pre-pierce, power pierce,,, separately setting output laser watt, frequency, laser type, air type, pressure, auto cutting height during pierce and cutting.

7.     Support to set separate lead in/out speed according to adjustment of laser power.

8.     Big storage, allowing user to save all cutting parameters to use it again on same material.

9.     Breakpoint recovery, CNC can return to the point where the cutting stopped, allowing partial file cutting. It can go to any point to start there after stop or pause.

10.  Same software can support round tube cutting and plate cutting, programming is same, and support intersect cutting.

11.  Support to cut at set height, automatically seek edge, and start from outside of workpiece, or lift up when torch is out of workpiece.

12.  Powerful expanding capability, over 15 PLC process programming, over 30 programmable processes.

13.  Input/output and alarm input are programmable, support wireless remote control, and support internet ...

Parts installation of Han's GS laser cutting machines in customers:
Company Profile of HAN'S GS LASER:
Wuhan Hans Goldensky laser system Co.,Ltd. is subsidiary company of Han's Laser Technology Industry Group Co.,Ltd. (stock code: 002008). We are high-tech enterprise specialized in R&D, manufacture and provide laser cutting, laser welding, laser cladding/quenching, and high-speed laser perforating equipment and solutions.

1. Top supplier of high power laser generator and laser complete system in China
2. Holding subsidiary of Hans Laser in Shenzhen
3. High tech enterprise of Optic Valley under government support, with 20000 Industry Park
4. Registered capital 80 million, 125 employees
5. Total sales amount of 98 million in 2012, profit of 16 million
6. Accumulated assets 150 million, asset-liability ratio 30%, 50% increasing speed in the last three years

HANS GS FAQ:

1.Q: Are you a factory or trading company?
 A:We are a manufacturer with $13 million registered capital & 20000 square meters Han's Goldensky Science and technology park.

2.Q: What is the payment terms?
  A:The payment terms we accept include: Western Union, Cash, L/C, T/T (30% advance payment as deposit, 70% balance payment should be paid before shipment.)

3.Q: How long is the delivery date?(After getting the deposit)
   A: It is different from 25-45 workdays according to the models, OEM is also available, delivery time need to be final confirmed on both sides.

For offer the most suitable machine with favorable price, please confirm below questions:
1.What kind of material do you want to cut?
2.What is the mostly used thickness and what is the maximum thickness?
3. What is the MAX. dimension of your materials ?
4. After cut, what will be the metal used for? (application)
5. Are you an end user or reseller?
 

Contact Us:

 


Sa
Advantages of 1000W fiber laser cutting machine

Stable performance with high cutting speed, precision , efficiency and protection
1.High speed: Capable to cut sorts of metal board with air blowed; the cutting speed can reach dozens of meters per min.
2.High precision: Adopt high precision drive structure with imported service motor, ±0.03mm positioning precision
3.High efficiency: Software with strong function, capable to design sorts of shapes, letters for cutting with easy and convenient operation.
4.High protection: the laser source and machine tool is comprehensively sealed to ensure the security of the operator, the whole working process can be viewed and inspected through the glass.

Parameters of 1000W fiber laser cutting machine
   


Features of Han's GS Laser Cutter

1.Low running and maintenance cost 
1.1Lower running cost compared with traditional CO2 laser cutting machine, the power consumption is 20%-30% of CO2 laser cutting machine.
1.2Environmental protection, low power consumption which is just 20%-30% compared with traditional CO2 laser cutting machine.
1.3The maintenance cost of fiber laser cutting machine is much lower since it's without reflective lenses.
 
2.Rational Structure and Easy Operation
2.1 Professional CNC laser control system with computer control which is more simple and convenient for operation.
2.2 Satisfied with flexible processing with small size and intense structure design.
2.3 Convenient operation with fiber transmission, laser route adjustment is unnecessary.
2.4 Gantry design with double drive structure, high damping machine tool with better rigidity which can stand higher speed and acceleration speed.
2.5 Adopt with alternative drive system and transmission system which are imported from abroad to ensure the high speed, high precision and high reliability.
2.6 The rack and guide is comprehensively sealed to prevent the friction without oil and dust pollution in order to make the drive system much longer service time and ensure the movement precision of the machine tool.
 

 Machine table Features

1.    Gantry dual drive, adopting advanced gear rack transmission structure. Equipped with grinding gear and rack, and through the precision collimator one time metering assembly. The machine will secure long-term high cutting speed, high precision transmission.

2.    The machine table machined by large planomiller, with high temperature annealing twice, and high strength complete welding, customer will have long-term payback.


 

Professional CNC controller introduction

1.     Support different images format as Al, DXF, PLT, Gerber, can read standard ISO G codes from MaterCam, Type3 such nesting software.

2.     Automatically optimization when open or lead in DXF file, like delete repeated line, merge connected lines, recognize in/out cutting file and file sorting out.User can decide to manually do above work, or let controller do it automatically.

3.     Support conventional picture edit functions

4.     Following what you see is what you get, to set lead in/out, kerf compensation, merge, bridge, over burning, save gap ….etc

5.     Unique function of Preview of cutting work flow.

6.     Support segmental pierce, Progressive pierce, Pre-pierce, power pierce,,, separately setting output laser watt, frequency, laser type, air type, pressure, auto cutting height during pierce and cutting.

7.     Support to set separate lead in/out speed according to adjustment of laser power.

8.     Big storage, allowing user to save all cutting parameters to use it again on same material.

9.     Breakpoint recovery, CNC can return to the point where the cutting stopped, allowing partial file cutting. It can go to any point to start there after stop or pause.

10.  Same software can support round tube cutting and plate cutting, programming is same, and support intersect cutting.

11.  Support to cut at set height, automatically seek edge, and start from outside of workpiece, or lift up when torch is out of workpiece.

12.  Powerful expanding capability, over 15 PLC process programming, over 30 programmable processes.

13.  Input/output and alarm input are programmable, support wireless remote control, and support internet ...

Parts installation of Han's GS laser cutting machines in customers:
Company Profile of HAN'S GS LASER:
Wuhan Hans Goldensky laser system Co.,Ltd. is subsidiary company of Han's Laser Technology Industry Group Co.,Ltd. (stock code: 002008). We are high-tech enterprise specialized in R&D, manufacture and provide laser cutting, laser welding, laser cladding/quenching, and high-speed laser perforating equipment and solutions.

1. Top supplier of high power laser generator and laser complete system in China
2. Holding subsidiary of Hans Laser in Shenzhen
3. High tech enterprise of Optic Valley under government support, with 20000 Industry Park
4. Registered capital 80 million, 125 employees
5. Total sales amount of 98 million in 2012, profit of 16 million
6. Accumulated assets 150 million, asset-liability ratio 30%, 50% increasing speed in the last three years

HANS GS FAQ:

1.Q: Are you a factory or trading company?
 A:We are a manufacturer with $13 million registered capital & 20000 square meters Han's Goldensky Science and technology park.

2.Q: What is the payment terms?
  A:The payment terms we accept include: Western Union, Cash, L/C, T/T (30% advance payment as deposit, 70% balance payment should be paid before shipment.)

3.Q: How long is the delivery date?(After getting the deposit)
   A: It is different from 25-45 workdays according to the models, OEM is also available, delivery time need to be final confirmed on both sides.

For offer the most suitable machine with favorable price, please confirm below questions:
1.What kind of material do you want to cut?
2.What is the mostly used thickness and what is the maximum thickness?
3. What is the MAX. dimension of your materials ?
4. After cut, what will be the metal used for? (application)
5. Are you an end user or reseller?
 

Contact Us:

 


Sa

Folding Packing With Stacking

There are many products classified in this section of Automatic Desiccant Wrapping. They are focused on folding all kinds of garments with Desiccant Wrapping. Attention: The following garment are applied to this auto folding packing machine. Like, garment designed with many accesories, too thick coat,suits t shirts.

All machine include the following function:

1.Within the allowable value range, the folded length and width can be adjusted as you want.
2.The machine can automatically detect the length of garment, when the garment size is different, machine can intelligently identify and automatically fold according to the first folding length, so as to ensure the uniform folding length without changing the polybag. Clothes of different sizes can be folded into uniform sizes and packed into bags.

3.Machine will calculate the number of completed pieces automatically, and the alarm function for multiple
garments can be set up.

Coveralls Clothing Folding Machine, Polo Clothing Folding Machine, Towels Clothing Folding Machine, Uniforms Clothing Folding Machine

ShenZhen Lingchuang Automated Technology Co.,Ltd , https://www.szlcautos.com