Dsr150V Rotary Roots Blower Roots Vacuum Pump Positive

2020-07-11 14:27:21
Model NO.: DSR150V
Air Capacity: 11.60-27.80 M3/Min
Rotating Speed: 810-1780 Rpm
Motor Power: 7.5-45 Kw
Driving Method: Belt and Coupling Drive
Net Weight: 394kg
Type of Technology: Positive Displacement Pumps
Medium: Air, Neutral Gases
Conveying: Oil-Free
Certificate: ISO9001 and Ce Certificate
Noise: Under 80dB
Trademark: DICHENG
Transport Package: Fumigation Free Plywood Case
Specification: DSR150V
Origin: China
HS Code: 841459
DSR150V rotary roots blower roots vacuum pump positive

Product Introduce
Dsr150V Rotary Roots Blower Roots Vacuum Pump Positive
DICHENG DSR150V rotary roots blower roots vacuum pump positive adopts the advanced technology of Japan,
its air capacity is 11.60m3/min - 27.80m3/min,
the negative pressure is from -9.8Kpa to -49Kpa. 
The main characteristic of our air blower is small volume, light weight, flow strong, noise small, steadily reliable operation.

Product Feature
Dsr150V Rotary Roots Blower Roots Vacuum Pump Positive
1. Air flow and pressure can be customized
2. Stable air flow and less pressure variation
3. Clean air not with oil moist
4. Construction simple and easy maintenance
5. Bearing are all lubricated by oil moist
6. Long service life

Description of Performance parameters
The performance parameters table shows the model, outlet diameter, rotate speed, discharge pressure, air capacity and power of motor.
1. The air capacity and pressure in the tables is in standard suction state. The standard suction state is 20ºC temperature, 1.033 kgf/cm2(101.3Kpa) Standard atmospheric pressure and 65% relative humidity.
2. The air capacity and pressure range of some blower models is repeated, to ensure the service life and low noise, should use the larger model.
Type of technology Positive displacement blowers
Design Negative pressure
Air capacity 11.60 to 27.80 m³/min
Negative Pressure -9.8 to -49Kpa
Medium Air, Neutral gases
Conveying Oil-free
Weight 394kg
Discharge Diameter 150mm(or customized)

Blower Structure Diagram
Dsr150V Rotary Roots Blower Roots Vacuum Pump Positive
No. Name Material Q' ty No. Name Material Q' ty
1 Shell HT200 1 14 Z sealing ring Nitrile rubber 1
2 Impeller HT200 2 15 Gear 35CrM 2
3 Drive shaft 45Cr 1 16 Gear lock washer Q235 2
4 Driven shaft 45Cr 1 17 Gear lock nut SS400 2
5 Drive side siding HT200 1 18 Gearbox HT200 1
6 Gear side siding HT200 1 19 Sleeve 45 1
7 Drive bearing NSK 2 20 End cover Q235 2
8 Driven bearing NSK 2 21 Pin 45 1
9 Sealing ring Nitrile rubber 2 22 Plug 35 1
10 Sealing ring Nitrile rubber 2 23 Oil gauge   1
11 Bearing sleeve 45 4 24 Vent   1
12 Bearing cover HT200 1 25 Grease nipple C3605 2
13 Bearing cover HT200 1 26 Gearbox seals Barley paper 2

Blower Accessorie
Inlet filter silencer, Discharge silencer, Anchor bolts, Baseframe, Safety valve, Check valve, Discharge pressure gauge, Flexible connections, Lubricant oil. 
Dsr150V Rotary Roots Blower Roots Vacuum Pump Positive

Roots Vacuum Blower Application
Vacuum packaging Exhaust dust emissions Vacuum dehydration
Vacuum packaging using vacuum suction Remove dust or toxic gas from tunnels and small construction sites  Pulp dewatering, sludge dewatering, cloth dehydration and etc.
Industrial vacuum cleaner Powder and granules
 transportation		 Draw welding waste gas
Remove residual debris from the machine Powder or granules
 (such as plastic materials, etc.) can be transported by pressure or vacuum		 Remove fumes and dust from welding to ensure operator health
Printing machine adsorption    
Using the adsorption force fixed in printing operations    

Common malfunctions and Solution
Malfunctions Reason Solution
Blower Can not rotate Can rotated by hand The motor is damaged Repair or replace the motor
Can rotated round by hand The lobes are locked Open to repair
The impurity in blower Open to clean
Can rotate Abnormal sound or vibration Skid, v-belt is too tight or too loose Adjust v-belt tension
Pulley offset Reset pulley
Pulley and belt cover friction Adjust belt cover
Bearing oil lack or aging To replace the oil
Gear oil lack or aging To replace the oil
The safe valve leakage Adjust the safe valve
Foundation insufficient strength To strengthen the foundation strength
Piping resonance Eliminate by the silencer and support
Exhaust pressure rises abruptly See *annotated
Anchor bolt is too loose Tighten
Rotor interference Open to repair
The impurity in blower Open to clean
Check valve bad Replace
Overheating Exhaust pressure rises abruptly See *annotated
Temperature of working environment  exceeds 40 ºC Ventilated working environment
Inlet silencer obstruction Cleaning/replace filter
Airflow insufficient Pipeline leaks Tighten the pipe connection
Inlet silencer obstruction Cleaning/replace filter
The safe valve leakage Adjust the safe valve
V-belt is too loose Adjust v-belt tension
Exhaust pressure rises abruptly See *annotated
Exhaust pressure rises abruptly Shut off the valve Fully open the valve
The water level rises Adjust water level
Inlet/outlet pipe jams Cleaning debris
Valve bad or twist reversed direction Replace or reverse direction twist
Airflow overpowered Reduce round speed or exhaust
Oil leak Lubrication oil overmuch Refuel to the center of oil standard
 
Processing Workshop
Dsr150V Rotary Roots Blower Roots Vacuum Pump Positive

FAQ
1. What's the information should I provide when inquiry?
A: Air capacity
B: Pressure
C: Application
D: Use environment(Temperature, atmospheric pressure)
E: Do you need motor?
Or other specials you give us will be more appreciated. 
2. What is your warranty?
Our warranty is 12 months after received the roots blower. During the warranty period, replace the damaged parts for free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure continuous safe and high-quality equipment operation.
3. How long is the service life of roots blower?
In normal use environment
A- Service life of blower is more than 10 years.
B- Service life of Impeller is more than 60,000 hours.
C- Service life of bearing is more than 30,000 hours.
D- Service life of gear is more than 60,000 hours.
4. What is your terms of packing?
A: Generally, we pack our goods in Fumigation Free Plywood Case. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
5. How does your factory control product quality? 
We have quality inspection department. Before sending out product, we check each product. If there is quality problem, we will produce new one.
6.What are your terms of payment?
1. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE SHIPPING.
2. 100% IRREVOCABLE L/C AT STGHT.

Contact Us
Shandong Dacheng Machinery Technology Co., LTD
Address: Zhangqiu Mingshui, Jinan City, Shandong province, China 250200.
Website: http://www.chinadicheng.com
Tel: +86 0531-83216898
Fax: +86 0531-83216898
Cellphone: +86 013188890202

Automatic Glass Cutting Line include automatic Glass Loading Machine,Automatic Glass Cutting Machine and automatic glass breaking machine.


Our Automatic Glass cutting line adopt Japan YASKAWA servo system and LNC controller. The main feature is operate conveniently, wide application, high cutting speed, higher precise cutting size, fast, stable, and accurate start and stop. This machine units have fully automatic operation for glass taking ,sending, cutting and breaking with high production efficiency, low labor intensity, which is suitable for mass production.


Automatic Glass Cutting Line

Automatic Glass Cutting Line,Low-E Insulating Glass Production Line,Advanced Insulating Glass Production Machine,Ce &Iso-9001 Approved Insulating Glass Machine

JINAN WEILI MACHINE CO LTD , https://www.weiliglassmachine.com