Hrl158 Servo Motor Plastic Injection Molding Machine
Contact Person: Andy Chou  Â
1) machines configuration
a) control: Techmation  ------------------------ Taiwan
b) servo motor:  Phase  ----------------------------Italy
c) Servo driver: Inovance---------------------------China
d) Pump: Sunny --------------------USA
e) Electron Components: Schneider--------------France
f) Position Transducer :Â Novotechnik----------------Germany
2) machines delivery times.
HRL158: We have stock, just as follows, the delivery time is 10 days.
3) payment item:
    30% down payment as T/T. rest 70% will paid by T/T before shipment.
Part two Machines warranty
1) all the machines will be given service for whole life.
2) all the machines warranty is 1Â years. Except the easy broken parts. But all the casting parts with tie-bar will be 2Â years
3) Screw warranty :Â if use 100% new material. will be one years. if 100% recyle material. Will be 6Â month.
4) technology support for machines whole life.
Part three  machines setup and training customer's engineer
In usual our engineer can come to customer's factory setup and training engineer within 10days. engineer salary and visa payment paid by our side.  the air ticket (go and back) and your local hotel and safe also food paid by your side.
Part four Parameter of the HRL158
Screw Diameter: A: 38mm B: 42mm C: 45mm
Screw L/D Ratio: A: 23Â Â B: 20.8Â Â C: 19.4
Shot Volume (Theoretical): A: 260CM3Â Â B: 318CM3Â Â C: 365CM3
Injection Weight (PS): A: 230g B: 281g C: 322g
Injection Pressure: A: 223MPa B: 182MPa C: 159MPa
Max. Injetion Rate: A: 112CM3/S B: 137CM3/S C: 157CM3/S
Max. Plasticizing Capacity: A: 13.5g/s B: 16g/s C: 21.5g/s
Max. Screw Rotation: 208RPM
Injection Stroke: 230mm
Clamping Force: 1580KN
Toggle Stroke: 380mm
Min. Mold Height: 160mm
Max. Mold Height: 470mm
Space Between Tie Bars: 450*420mm
Ejector Tonnage: 53KN
Ejector Stroke: 120mm
Heating Power: 8KW
Heating Section: 3+1
Motor Power: 13KW
Oil Tank Capacity: 270L
Machine Dimension: 4.5*1.4*1.9m
Max. Pump Pressure: 16MPa
Machine Weight: 4Ton
Please take more reference for our machine for the following photos,
Â
EPT specialize in Rapid Vacuum Casting (also referred to as room temperature vulcanization/RTV) to create short run quantities of production-like parts at low cost to the customer.
Vacuum casting offers a wide range of options for companies needing specific finishes,materials, or other features in their prototypes. We have the ability to simulate a full range of thermoplastics and elastomers, and we can also over-mold one
material over another to simulate, for example, rubber over ABS, or opaque plastic over transparent plastic. It is also possible to over-mold threaded inserts.
After casting, painting and printing is common, although polyurethane casted parts can be colored in the mold. EPT also specialize in producing high-gloss clear parts by using a CNC machined and polished acrylic master model. Polyurethane casted clear parts are very high quality.
We can create small and large urethane cast parts with production-like aesthetics and material properties for a range of applications, including medical and healthcare, military, automotive, electronics packaging, consumer products, and others.
Rubber Like,Vacuum Rubber,Rubber Like Prototype,Vacuum Rubber Prototype
Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com