Pneumatic Wafer Short Type Ceramic Scum Slurry Gate Valve (GPZ673TC)

2020-03-05 06:06:19
Model NO.: GPZ673TC
Thread Position of Valve Rod: Outside Gate Valve
Usage: Emptying
Standard: DIN
Application: Industrial Usage
Design Pressure: Pn10, Pn16
Size: Dn50-Dn400
Connection: Wafer
Medium: Dry Ash in Power Plant, Slurry, Cement Ash, Powder
Suitable Temperature: Below 150 Deg C
Operation: Manual, Pneumatic, Electric
Trademark: GOOLE, OEM
Transport Package: Plywood Case
Specification: CE, SGS, GMP
Origin: Wenzhou, Zhejiang, China
HS Code: 8481804090
Model NO.: GPZ673TC
Thread Position of Valve Rod: Outside Gate Valve
Usage: Emptying
Standard: DIN
Application: Industrial Usage
Design Pressure: Pn10, Pn16
Size: Dn50-Dn400
Connection: Wafer
Medium: Dry Ash in Power Plant, Slurry, Cement Ash, Powder
Suitable Temperature: Below 150 Deg C
Operation: Manual, Pneumatic, Electric
Trademark: GOOLE, OEM
Transport Package: Plywood Case
Specification: CE, SGS, GMP
Origin: Wenzhou, Zhejiang, China
HS Code: 8481804090
Pneumatic  Wafer Short Type Ceramic Scum Slurry Gate Valve ( GPZ673TC)
Characteristics:
This valve is applicable as an on-off device for pipelines containing abrasive dry ash, water (such as cinder water ) and the like in mines, paper making, chemical engineering and so on, as an on-off for pipelines with both soft grains and corrosive media. Its working nominal pressure is 1.0MPa, applicable temperature is below 200 Deg C, and air supply pressure is 0.6-0.8MPa.

After the valve closed, it's fully sealed in any direction. Its middle body adopts WCB steel casting and seamless steel pipe welding. Its sealing surface adopts a hard sealing element.

Its feed inlet is fully through without any blocks, and it has an automatic compressed air anti-blcikage blowing unit, with strong abrasion resistance, a good sealability, a small starting load and with  little ash sezure of accumulation.

It adopts a high-grade toughened structural ceramic seal, featuring high mechanical strength, strong abrasion resistance, a long service life and a compact structure, which can be installed at any angle.

Special ceramics is different from general ceramics, its hardness even more than steel,
second only to diamond, and corrosion resistant, high temperature resistant!!!!! "" metal
valve with long easy to produce the gap, ceramic valve is not. Because of wear-resisting,
anti-corrosive, sealing strong, ceramic water valve very water saving. "" our valves can be
used 500000 times, if every switch 60 times, can use 22.8 years, this is metal valve can not do it. "

Main Parts and Materials
Sr No. Parts Material Sr No. Parts Material
1 Body WCB 7 Middle Body WCB
2 Disc 304+Ceramic 8 Packing Flexible Graphite
3 Seat Ceramic 9 Packing Gland 2Cr13
4 Stem 2Cr13 10 Bracket WCB
5 Stud 35CrMoVA      
6 Nut 25      

Application Specification
1. Design and Manufacture: JB/T 8691
2. Face to Face Dimension: GB/T 15188.2
3. Flange Dimension: GB/T 9113.1, ANSI B16.5  DIN 2543, JIS B2020
4. Inspection and Test: GB/T 8691
5. Material Standard: GB/T 12229 for Carbon Steel, GB/T 12230 for Stainless Steel

Main External and connecting Dimensions
DN PN L D D1 C H n-d  
50 10 43 160 125 16 520 4-18  
65 46 180 145 18 595 4-18  
80 46 195 160 20 635 8-18  
100 52 215 180 20 630 8-18  
125 56 245 210 22 715 8-18  
150 56 280 240 24 840 8-23  
175 56 310 270 26 885 8-23  
200 60 335 295 26 1155 8-23  
250 68 405 350 30 1400 8-23  
300 78 460 400 30 1800 12-23  

 

  Pneumatic  Wafer Short Type Ceramic Scum Slurry Gate Valve ( GPZ673TC)
Characteristics:
This valve is applicable as an on-off device for pipelines containing abrasive dry ash, water (such as cinder water ) and the like in mines, paper making, chemical engineering and so on, as an on-off for pipelines with both soft grains and corrosive media. Its working nominal pressure is 1.0MPa, applicable temperature is below 200 Deg C, and air supply pressure is 0.6-0.8MPa.

After the valve closed, it's fully sealed in any direction. Its middle body adopts WCB steel casting and seamless steel pipe welding. Its sealing surface adopts a hard sealing element.

Its feed inlet is fully through without any blocks, and it has an automatic compressed air anti-blcikage blowing unit, with strong abrasion resistance, a good sealability, a small starting load and with  little ash sezure of accumulation.

It adopts a high-grade toughened structural ceramic seal, featuring high mechanical strength, strong abrasion resistance, a long service life and a compact structure, which can be installed at any angle.

Special ceramics is different from general ceramics, its hardness even more than steel,
second only to diamond, and corrosion resistant, high temperature resistant!!!!! "" metal
valve with long easy to produce the gap, ceramic valve is not. Because of wear-resisting,
anti-corrosive, sealing strong, ceramic water valve very water saving. "" our valves can be
used 500000 times, if every switch 60 times, can use 22.8 years, this is metal valve can not do it. "

Main Parts and Materials
Sr No. Parts Material Sr No. Parts Material
1 Body WCB 7 Middle Body WCB
2 Disc 304+Ceramic 8 Packing Flexible Graphite
3 Seat Ceramic 9 Packing Gland 2Cr13
4 Stem 2Cr13 10 Bracket WCB
5 Stud 35CrMoVA      
6 Nut 25      

Application Specification
1. Design and Manufacture: JB/T 8691
2. Face to Face Dimension: GB/T 15188.2
3. Flange Dimension: GB/T 9113.1, ANSI B16.5  DIN 2543, JIS B2020
4. Inspection and Test: GB/T 8691
5. Material Standard: GB/T 12229 for Carbon Steel, GB/T 12230 for Stainless Steel

Main External and connecting Dimensions
DN PN L D D1 C H n-d  
50 10 43 160 125 16 520 4-18  
65 46 180 145 18 595 4-18  
80 46 195 160 20 635 8-18  
100 52 215 180 20 630 8-18  
125 56 245 210 22 715 8-18  
150 56 280 240 24 840 8-23  
175 56 310 270 26 885 8-23  
200 60 335 295 26 1155 8-23  
250 68 405 350 30 1400 8-23  
300 78 460 400 30 1800 12-23  

 

 

Mechanical seal:

Mechanical seal apply for the place require non-leakage environment. The Slurry Pump Gland seal is the Mechanical Seal, it is suit for the application where is not allow the leakage, with the wash water can reduce temperature of frication and take away the dusty which and increase the frication. 

Advanced the design and material help this type mechanical seal work in the long life.

 

 

Mechanical Seal

Mechanical Seal,Centrifugal Pump Mechanical Seal,Slurry Pump Components,Slurry Pump Gland

Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd , https://www.bkdrtech.com